Tumble Dryer

Technical Features

Tumble dryer is designed for continuous operation, heavy-duty use and to remove moisture from load of clothing and other textiles, usually shortly after they come from hydro extractor or washer extractor. Drying occurs at reasonable rate at relatively low temperature. Mode of operation is steam, electric, oil, gas heated. Manual Tumble Dryer and Automatic Tilting Tumble Dryer available to suit customer requirement.

The inner drum is made of stainless steel AISI grade 304. The sizes of perforation of inner basket are optimally designed so as to ensure right amount of air flow. The inner drum consists of stainless steel lifters to provide a consistent lift to garments. Back supporting plate made of stainless steel sheet stiffened with mild steel plate.

The outer body is fabricated from mild steel sheets and completely powder coated. It also includes air exhaust system, filters, door, drives and control system.

Steam, electric, oil, gas heating system is provided to suit customer requirement. The heater with the combination of unique air flow across the inner drum length ensures maximum and quick drying. Glass wool is filled inside outer body for better heating.

A continuously rated heavy-duty motor drives Inner drum via a worm reduction gear and multiple pulleys. The pulleys are of cast iron and belts are of ISI mark. All casting parts made in in-house production. Specially designed shaft supports the inner drum on heavy-duty roller bearing for noiseless operation. Exhaust fan driven by motor for better circulation of heat.
• Motor are of Siemens / Hindustan Electric / Crompton Greaves
• Worm reduction gear are of Elecon / Reelicon

Control and operating panels are supplied along with the machine either as an integrated part or as a separate system and designed to suit customer requirement. Control includes temperature control, automatic forward / reverses rotation of the inner drum. All necessary control required for smooth and safe operation of the machine is provided.
• Electric control equipment are of L & T / Telemacanique

Safety of operations, load and machine is taken into account during the design of the machine that includes:
• Thermal overload protection for motor
• Rear safety guard
• Door limit switch
• Inverter drive (optional)

• All mild steel parts painted and powder coated against corrosion.
• All stainless steel parts polished.

The machine is delivered ready to connect and supplied along with installation, operation, maintenance manual including foundation, installation plans, circuit diagram etc.


Capacity(kgs) 15 35 75 120 160 220
Inner drum volume(ltrs) 250 620 1200 1700 2400 4400
Inner drum diameter(mm) 762 1016 1220 1320 1524 1905
Inner drum length(mm) 534 762 1016 1220 1320 1524
Inner drum speed(rpm) 24 24 24 24 24 24
Drive motor(hp) 0.75 1 2 3 5 7.5
Exhaust fan motor(hp) 0.75 1 2 3 2*2 3*2
Gearbox(inch) 2.25snu 2.25snu 3snu 3.5snu 4snu 5snu
Overall length(mm) 965 1220 1450 1550 1780 2057
Overall width(mm) 1168 1346 1625 1870 2235 2387
Overall height(mm) 1524 1830 2135 2235 2490 2690
Electric supply 415V, 3phase, 50c/s, A.C
Manufacturer Of Industrial Washing, Processing & Finishing Equipments